Nmap est un scanner de ports open source créé par Fyodor et distribué par Insecure.Org. Il est conçu pour détecter les ports ouverts, les services hébergés et les informations sur le système d’exploitation d’un ordinateur distant. Ce logiciel est devenu une référence pour les administrateurs réseaux car l’audit des résultats de Nmap fournit des indications sur la sécurité d’un réseau.
Quelques exemples de commande nmap déjà paramétré et la sortie correspondante.
nmap -A -sV -T4 -P0 -vv 10.176.77.60
fournit la sortie suivante
Starting Nmap 4.20 ( http://insecure.org ) at 2007-10-02 13:42 CEST Initiating Parallel DNS resolution of 1 host. at 13:42 Completed Parallel DNS resolution of 1 host. at 13:42, 0.00s elapsed Initiating Connect() Scan at 13:42 Scanning 10.176.77.60 [1697 ports] Discovered open port 22/tcp on 10.176.77.60 Discovered open port 80/tcp on 10.176.77.60 Discovered open port 199/tcp on 10.176.77.60 Discovered open port 3306/tcp on 10.176.77.60 Completed Connect() Scan at 13:42, 6.80s elapsed (1697 total ports) Initiating Service scan at 13:42 Scanning 4 services on 10.176.77.60 Completed Service scan at 13:44, 113.80s elapsed (4 services on 1 host) Host 10.176.77.60 appears to be up ... good. Interesting ports on 10.176.77.60: Not shown: 1693 closed ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 4.2p1 Debian 7ubuntu3.1 (protocol 2.0) 80/tcp open http Apache httpd 2.0.55 ((Ubuntu) PHP/5.1.2) 199/tcp open smux Linux SNMP multiplexer 3306/tcp open mysql? Service Info: OS: Linux Service detection performed. Please report any incorrect results at http://insecure.org/nmap/submit/ . Nmap finished: 1 IP address (1 host up) scanned in 120.697 seconds
sortie de la commande nmap -h
Nmap 4.20 ( http://insecure.org )
Usage: nmap [Scan Type(s)] [Options] {target specification}
TARGET SPECIFICATION:
Can pass hostnames, IP addresses, networks, etc.
Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
-iL <inputfilename>: Input from list of hosts/networks
-iR <num hosts>: Choose random targets
--exclude <host1[,host2][,host3],...>: Exclude hosts/networks
--excludefile <exclude_file>: Exclude list from file
HOST DISCOVERY:
-sL: List Scan - simply list targets to scan
-sP: Ping Scan - go no further than determining if host is online
-P0: Treat all hosts as online -- skip host discovery
-PS/PA/PU [portlist]: TCP SYN/ACK or UDP discovery to given ports
-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
-n/-R: Never do DNS resolution/Always resolve [default: sometimes]
--dns-servers <serv1[,serv2],...>: Specify custom DNS servers
--system-dns: Use OS's DNS resolver
SCAN TECHNIQUES:
-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
-sU: UDP Scan
-sN/sF/sX: TCP Null, FIN, and Xmas scans
--scanflags <flags>: Customize TCP scan flags
-sI <zombie host[:probeport]>: Idlescan
-sO: IP protocol scan
-b <ftp relay host>: FTP bounce scan
PORT SPECIFICATION AND SCAN ORDER:
-p <port ranges>: Only scan specified ports
Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080
-F: Fast - Scan only the ports listed in the nmap-services file)
-r: Scan ports consecutively - don't randomize
SERVICE/VERSION DETECTION:
-sV: Probe open ports to determine service/version info
--version-intensity <level>: Set from 0 (light) to 9 (try all probes)
--version-light: Limit to most likely probes (intensity 2)
--version-all: Try every single probe (intensity 9)
--version-trace: Show detailed version scan activity (for debugging)
OS DETECTION:
-O: Enable OS detection (try 2nd generation w/fallback to 1st)
-O2: Only use the new OS detection system (no fallback)
-O1: Only use the old (1st generation) OS detection system
--osscan-limit: Limit OS detection to promising targets
--osscan-guess: Guess OS more aggressively
TIMING AND PERFORMANCE:
Options which take <time> are in milliseconds, unless you append 's'
(seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
-T[0-5]: Set timing template (higher is faster)
--min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes
--min-parallelism/max-parallelism <time>: Probe parallelization
--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies
probe round trip time.
--max-retries <tries>: Caps number of port scan probe retransmissions.
--host-timeout <time>: Give up on target after this long
--scan-delay/--max-scan-delay <time>: Adjust delay between probes
FIREWALL/IDS EVASION AND SPOOFING:
-f; --mtu <val>: fragment packets (optionally w/given MTU)
-D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys
-S <IP_Address>: Spoof source address
-e <iface>: Use specified interface
-g/--source-port <portnum>: Use given port number
--data-length <num>: Append random data to sent packets
--ip-options <options>: Send packets with specified ip options
--ttl <val>: Set IP time-to-live field
--spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address
--badsum: Send packets with a bogus TCP/UDP checksum
OUTPUT:
-oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,
and Grepable format, respectively, to the given filename.
-oA <basename>: Output in the three major formats at once
-v: Increase verbosity level (use twice for more effect)
-d[level]: Set or increase debugging level (Up to 9 is meaningful)
--open: Only show open (or possibly open) ports
--packet-trace: Show all packets sent and received
--iflist: Print host interfaces and routes (for debugging)
--log-errors: Log errors/warnings to the normal-format output file
--append-output: Append to rather than clobber specified output files
--resume <filename>: Resume an aborted scan
--stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML
--webxml: Reference stylesheet from Insecure.Org for more portable XML
--no-stylesheet: Prevent associating of XSL stylesheet w/XML output
MISC:
-6: Enable IPv6 scanning
-A: Enables OS detection and Version detection
--datadir <dirname>: Specify custom Nmap data file location
--send-eth/--send-ip: Send using raw ethernet frames or IP packets
--privileged: Assume that the user is fully privileged
--unprivileged: Assume the user lacks raw socket privileges
-V: Print version number
-h: Print this help summary page.
EXAMPLES:
nmap -v -A scanme.nmap.org
nmap -v -sP 192.168.0.0/16 10.0.0.0/8
nmap -v -iR 10000 -P0 -p 80
SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES